Hull Industries' Complete Molding Solution Process - Automatic Material Loading - Mold Design - Thermoset and Composite Molding Presses - Automated Parts Handling - Deflashers - Hull Industries' Complete Molding Solution Process

• Complete Molding Solution
  • Automatic Material Loading
  • Mold Design / Presses
  • Automated Parts Handling
  • Deflashers
• Plastic Molding Equipment
  • Transfer Presses
  • Compression Presses
  • Automatic Compression Presses
  • Shuttle Presses
  • Injection Presses
  • Custom Presses and Equipment
• Hydraulic Stuffer
• Deflashing Systems
  • Low Pro Inline Deflasher
  • Rollaveyor Deflasher
  • Tumble Blast Deflasher
• Mold Design & Repair
• Vacuum Potting Systems
• Vacuum Impregnation Systems
• Rebuilding & Refurbishing
• Spare Parts
• Onsite Service

Plastics Molding Equipment

Injection Molding, Transfer, Compression, Shuttle, Automatic Compression & Custom Presses

The shuttle press is a high production rate press for parts requiring the operator to load intricate inserts into the mold. The mold consists of two lower halves with a common top half. Inserts can be loaded in one bottom half as the other is curing. A PLC is used for easy cycle and temperature set up, through an operator touch screen interface. Presses are available in either electric or hydraulic configurations.

Select a Shuttle press to:

1. Increase production and decrease costs by having one operator for two convenient loading stations.
2. Load and unload one bottom mold half while components in the second half are undergoing cure.
3. Easily load individual components into the mold at the unobstructed work stations.
4. Use the same machine for both encapsulation and general insert molding work.
5. Obtain greater operator safety because inserts can be loaded in the clear, not between two halves of a mold.
6. Place a preform pill, which may be preheated, in the closed mold, or place loose powder in a closed mold.

Small parts with delicate inserts such as microcircuits, integrated circuits, transitors, or large parts such as coils, transformers, and relays can be encapsulated. Parts requiring core pins, threaded inserts, and coring prior to ejection can be routinely produced. An adjustable low pressure system for the pressing phase for both the clamp and transfer rams enables this press to cover a broader molding scope not normally associated with large machines.

Additional types and sizes of encapsulating and molding machines are included in Hull’s complete line. The machine and accessories you buy have the latest and best performance and design features.

Please view .PDF for additional details and specifications